Simple wooden feeders. DIY bird feeder: a selection of ideas
We will send the material to you by e-mail
In harsh winter times, only a person can take care of the birds that remain for the winter near his home. Not all birds are ready to go to warm countries; many migrate in search of food to small areas. The nimble birds do not hibernate, they are endlessly in search of food, and if there is no food, then the nimble creatures literally fall dead right under people’s feet. Editorial websiteis concerned about the fate of our feathered friends and offers readers useful material on how to make a bird feeder with your own hands.
Feeders are an opportunity for a bird to survive in winter, and in the spring it will thank humans by fighting harmful insects in the garden
Before you rush out and build a structure from the first materials you come across, you should consider what types of designs there are for outdoor bird feeders. Perhaps there are already convenient instructions and a drawing of the birds’ future feeding area. Not every bird's dining room is convenient - some birds will not be able to feed from certain structures, others will have to wait until their more nimble comrades have eaten. Birds are different; it depends on how the bird is used to feeding, whether it will be convenient for her to take food from your feeder, or whether the anatomy of the beak will not allow this.
In addition to the fact that the food should be visible from afar, the design should be such that the food will not be swept away by the wind: not only will the food get lost, but also the food scattered on the ground serves as an excellent marker for small predators. Let's study the best designs for a bird canteen.
The simplest designs
The suspended platform is located either on a rope or in a mesh case. Tits love to eat in such a place, but a woodpecker will not be able to visit such a kitchen.
Advice! If you want to feed the tits, you can simply hang a ball of a mixture of lard and seeds with inclusions of vegetables.
The trays are convenient to place, their sides do not allow food to spill out, and in general the design is quite stable. A roof is not required in the building.
To set up a food area, one rectangular square is enough. plywood, four pieces of wood for the sides and rope for fastening. Sometimes they simply secure a plastic egg container in a stable place and pour grain and bread crumbs into the compartments. They also use other plastic trays for vegetables or salads. This is rather a temporary solution, since the plastic will quickly be blown away by the wind, or the mini-dining room will collapse during a snowfall.
Feeders in the form of a house and closed options
The house looks more solid and reliable - the roof protects the edible contents and the birds themselves from wind and snow, and besides, the ubiquitous sparrows do not like to poke their noses into such feeders. The disadvantage of houses with roofs is that forest birds may not notice the life-saving treat and die of hunger right under the bird's kitchen. To do this, first feed the birds, scattering food around.
Many guests fly to the house with a pitched roof to feed: pigeons, waxwings, jays, and nutcrackers. If a perch is equipped, then the area around the bird's dining room will always be noisy and interesting. It is easiest to build a house with a flat roof, but a significant drawback will be the retention of snow on it, which can cause the bird’s canteen to fall.
Sparrows do not like bunker feeders: flocking birds do not fit in the feeding area, and those that do fit will not be able to interfere with buntings, titmice and other birds.
The bunker structure has several compartments for feeding different birds; sometimes there are sections for various feeds. Making your own bunker bird feeder is not difficult: you can make a structure from a plastic bottle, a plate, thread and super glue.
Related article:
DIY birdhouse made of wood. Drawings, review of materials, dimensions of the structure; features of manufacturing from cardboard, wood, bottles and plywood; decor and installation - read our publication.
How to make feeders for street birds with your own hands - description and drawings
Let's pay tribute to the vastness of the Internet: it is not necessary to reinvent the wheel when there are ready-made recommendations, instructions and drawings with pictures. It’s okay if it’s someone else’s idea - another person’s execution will add a new twist to the design.
DIY bird feeder made of wood
Wood is an excellent durable material. Minimal skills in working with wood are desirable, but even beginners can easily build a wooden feeder.
It is not necessary that all surfaces be perfectly smooth; the more creative the craft, the more interesting it will be to watch how the birds master it. You can find 4 thick, beautifully shaped branches and prepare a platform from wood or plywood. The roof is made of wooden slats, but you can make a roof from the bark of old trees - such a design will look very organic.
DIY bird feeder made of plywood
Plywood is a convenient material and has a service life of several years. Plywood feeders, which is a plus. When working with plywood, use a tape measure, a drill, a corner, a pencil, screws and a knife.
Important! The calculations take into account that the roof is larger in size than the bottom - this prevents moisture from getting inside the structure.
All markings from the drawing are transferred to a sheet of plywood and blanks of the selected sizes are cut out with a jigsaw.
The sides for the fencing are attached to the base with screws. The bottom and roof are connected to each other by longitudinal slats. The height between the roof and the base should be comfortable for birds, but not too high.
Advice! It is better to treat plywood with an antiseptic waterproofing solution - this will significantly increase the service life of the product.
Parts for the roof are made from identical sheets, which are connected to each other with screws.
Simple options for making feeders from boxes
Tetrapack is a material that you don’t even need to specifically look for: juice and milk boxes can serve as an excellent base for making a feeder for your feathered friends. By connecting two narrow boxes and making holes in them at different heights, you get a bunker canteen for birds.
To work you will need a knife, scissors, rope and 5 minutes of time.
The most interesting models of feeders made from plastic bottles
Plastic bottles are never used. The plastic feeder is light, creative and convenient for the birds. More often they take bottles of 0.25-0.5 liters. Holes are drawn with a marker, which are then cut out with scissors.
Original hanging bird feeders
In addition to the above materials, use any other available material.
Methods for attaching a bird feeder to a window
Those who like to observe the inhabitants outside the window can be advised to purchase or make a bird feeder with suction cups. This mount allows you to admire the flying birds all winter, photograph them and regularly change the food.
The glass is washed with vinegar and water and suction cups are pressed tightly against it. That's all the difficulties associated with attaching the feeder.
Related article:
You, probably, like many site owners, want to know what you can do with your own hands for garden decoration, because decorative decorations in the store are so expensive. In this review we will tell and show what can be created from scrap materials.
Bird feeders - what types of feed are there?
In an article about feeding birds, we must not forget to talk about those birds that bring unconditional benefits to humans. Tray feeders are used to feed chickens - they are designed in such a way that the chick does not fit completely into the feeder and does not have the opportunity to spill the food.
Trough feeders can be limited at the top by a grid and divided inside into compartments for different types of food.
Used for dry food: poured grain in the morning and remembered a fresh portion the next morning. The environment is kept clean, and the food is supplied in doses as it is eaten.
How to make a chicken feeder with your own hands
It is not always possible to have the means or desire to purchase a chicken feeder in a store. We offer several options that are convenient and easy to manufacture.
Do-it-yourself bunker feeder for chickens made of wood or plywood - description and drawings
This method takes more time. The video shows all stages of work:
To make it, you need thick-walled plywood, screws, 90° hinges, sandpaper, a jigsaw, a tape measure, a pencil, a ruler, a saw, a drill with drills, and a clamp.
First, mark the desired dimensions on the plywood and draw out all the details with a pencil and ruler. All parts are cut out with a jigsaw, and holes for fastening are immediately made with a drill. The edges of all parts are sanded and then assembled using screws and a clamp.
Advice! The front part can be made of transparent plastic - this way the amount of feed will always be visible.
The lid is attached with hinges to the side walls. The product is treated with an antiseptic.
Making a chicken feeder from PVC pipes
Take 1-3 sewer pipes with a diameter of 15 cm, plugs and according to size if necessary. It is better to make the pipes of medium length - and there will be a lot of feed and good stability.
The two parts are connected with a knee, the larger one is laid horizontally and several holes with a radius of 4 cm are made in it with a drill with a circular bit. A plug is installed at the other end. The second option is installed vertically, and the elbows are placed on both sides of the main pipe.
Feeder made from plastic bottles
A convenient option for both drinking bowls and feeders: made from a 19-liter bottle and PVC pipe. To make it, a hole is made on top of the bottle for a pipe, in which the edge is beveled at the bottom. Holes are made at the bottom along the base so that the bird sticks its head into them for food. The grain is poured into the pipe.
Making a chicken feeder from a bucket
An automatic chicken feeder made from a plastic bucket and a plastic container or container is very convenient. The diameter of the feeding bowl should exceed the diameter of the bucket by 15 cm. Holes for food are cut out at the bottom of the bucket. The containers are connected to each other with self-tapping screws.
Features of making your own chicken feeders
Chickens can actively scatter food with their paws, so a structure is provided for their feeding where they will be deprived of this opportunity and will not stain the food.
Making your own bird feeder is not difficult. In winter, birds are in great danger; they need to be fed.
This is why people create feeders and help birds survive this cold season.
Feeders can be created using any materials that are found in any home. They do not require financial investments or special knowledge, but only a good attitude towards the environment.
General rules for creating feeders:
- convenience;
- moisture resistance;
- safety (exclude sharp corners);
- walls and corners should not be sharp or prickly;
- fastening not lower than 1.5 m above the ground.
Plywood as a material for a feeder
You can make the drawings yourself, or you can find them on the Internet. When selecting or creating a drawing, take into account the features of the tiles.
If you plan to feed small birds, then plan a small opening so that large birds do not compete with them.
Prepare: plywood, hammer and nails, glue, jigsaw (electric), timber (about 20 by 20 cm) and sandpaper.
- Step 1 Mark the plywood and cut out the parts with a jigsaw. Make the square on the bottom and on the roof 5 cm larger (25x25 cm).
- Step 2 Sand the workpieces.
- Step 3 Cut out racks from the block (up to 30 cm).
- Step 4 Connect the parts with nails (or glue), attach the posts to the bottom, and attach the sides to the posts.
- Step 5 The roof is attached with self-tapping screws.
Wooden feeder
A reliable and high-quality material for any crafts is wood.
Prepare:
- for racks a block (4.5 by 2 cm);
- for the bottom plywood (square 25 by 25 cm);
- plywood for the roof (35 by 22 - two pieces);
- glue, screws, nails.
Step 1 Frame base – assemble the bottom with the sides. Cut pieces of timber to fit the bottom and connect. Glue the ends with glue and tighten with self-tapping screws. It is recommended to make the sides (two parallel) 5 cm longer than the bottom.
Step 2 Nail the bottom to the base frame.
Step 3 Screw the racks (from 18 to 20 cm) to the inside of the box.
Step 4 Attach two bars at right angles. Secure the joints with another block. You need to make two parts in the form of a right angle.
Step 5 Attach the rafters to the posts using rafters and nail pieces of wood to them for the roof.
Step 6 Glue sticks-perches to the sides (extended).
Feeder made from a milk carton
This type of bird house is often made in kindergartens and primary schools. Prepare: milk/juice carton, scissors, wire, marker and adhesive tape.
- Step 1 Cut holes on two opposite sides of the box.
- Step 2 Glue the edges of the “windows” with adhesive tape.
- Step 3 Punch a hole under the windows and insert a cardboard tube (from the cut holes).
- Step 4 Make holes for the wire in the bent corners.
Feeder made from plastic bottles
- Step 1 Cut holes on both sides of the bottle (leave bridges between them).
- Step 2 Apply adhesive tape to the sides.
- Step 3 Make holes at the bottom for the perch stick.
Feeder made from a five-liter plastic bottle
This type of feeder holds a lot of food, which is very convenient for feeding birds in winter. It is convenient for them to eat inside such a spacious product. You can involve the whole family to create. Prepare: bottles, knife (or stationery knife).
- Step 1 Cut a hole vertically or horizontally, depending on the mounting method.
- Step 2 If the holes are made horizontally, then you need to make two holes on the side (with a knife) and pass twine through them (to tie it up).
- Step 3 Place a small stone on the bottom to avoid falling during strong winds.
Feeder out of the box
You can create a feeder from almost any cardboard box. It is better to choose thick and laminated cardboard so that it will last longer in winter moisture conditions.
Making this feeder is easy because it already has the desired shape, walls, bottom and roof. You just need to cut the holes. Prepare: tape, knife and nylon cord.
- Step 1 Wrap the box with tape.
- Step 2 Cut the side holes.
- Step 3 Attach the fastening cord.
- Step 4 Place pebbles on the bottom.
There is an alternative version of this design. The lid can be glued perpendicularly so that it serves as a stand for food.
Then the side and roof will be from the second part of the box.
This product must also be carefully taped. Next you need to make two small wire hooks and lay them on the “ceiling” (twist and bend). The hooks need to be connected to each other, and now it can be hung on a branch.
Photos of bird feeders
Hanging homemade houses for birds to eat is a tradition that has come to us since Soviet times. Today, such bird canteens can be seen in parks, schoolyards and kindergartens. However, not everyone can withstand the vagaries of nature: wind, snowstorms and heavy rains. Agree, it’s a shame when your child, who so diligently crafted from cardboard, suddenly sees a bird’s canteen that has fallen into disrepair. Today the editors of the site will tell you how to make a bird feeder with your own hands, so that it will not be afraid of any disasters.
It is not so important whether the cat manages to catch the prey or not, you will always know that your bird feeder will withstand even an attack by a predator
Read in the article
Types of bird feeders: original ideas with photos
Choosing the right type of feeder is not an easy task. It is important to take into account many factors: the time of year, the amount of precipitation, the quality and thickness of the wood or window frame, where you plan to attach the structure, as well as which birds you are going to feed.
Someone will say that it is easier to buy a bird feeder than to make it yourself. For some, maybe yes, this is a solution, but you will lose uniqueness and communication with family members while working on the craft. You can build a homemade feeder from plastic and cardboard, wood and glass, and even clay. The main thing is to follow a few rules:
- The edges of the refectory for birds must be processed, especially if it is plastic or wood. Sharp sides can be covered with electrical tape, wooden ones can be sanded or sheathed with fabric.
- Consider in advance the stability of the structure and the perch so that the bird can calmly start eating without risking spending all the calories eaten to stay in place.
- The food should not spill onto the ground, as this will attract predators and therefore endanger the lives of the birds.
- The location of the feeder should be constant. You cannot move it from one place to another. And so that the bird notices the feeder, you can attract its attention with a bright rose hip or rowan berry. In some cases, it is even recommended to attach plastic toys or even rattles.
- The sides will be able to protect the poultry canteen from the wind, and the roof from the rain. You can put a thick magazine (or two) or a newspaper at the bottom of the structure. No, we are not trying to teach the birds to read and write, it’s just that in this way you can make the structure slightly heavier and it will sway less in the wind.
Important! For sparrows, it is better to make a smaller feeder, for example, from tetrapack; for larger birds, such as pigeons, tray structures are better suited - birds of different “calibers” will fit in them.
Let's look at the features of different designs.
Tray-type structures and platform feeders
Modern feeder trays are suspended structures that are mounted on. They are made of durable polycarbonate, with a small visor and a feed tray. In some metropolitan areas, there is a special program in which such trays are hung on some windows of businesses and buildings.
Advice! Be sure to think about how the perch will be attached to it, and what the landing site will be like.
However, not every family wants to put up with bird trills every morning, so platform feeders are more suitable for DIY construction (and for your own peace of mind).
Typically, such feeders are made from plywood and wooden boards, in rare cases - from old boxes of children's board games or candy. The advantage is that the birds can see from afar whether there is food, and do not risk falling into the clutches of a predator if it is lurking nearby. On the other hand, the structure is not protected from moisture or wind. Therefore, let’s move on to describing better quality feeders.
Bunker-type feeders and house feeders
They are convenient because the feed comes to the site automatically, under the influence of gravity.
It is important to take into account that birds will most often peck at the same point, so it is better to prepare a denser base in advance - a thick one. Cardboard may or may not withstand such a load.
A comment
Ask a Question" If you want to feed tits or woodpeckers, make a narrower area; if you want to feed sparrows (and they always move in flocks), then make a wider one.
"Hopper-type feeders can be very different. Both glass and .
Feeders in the shape of a house are a classic version of this craft. They are quite simple to make; you can use an ordinary cardboard box as a basis. Some people buy ready-made structures made of polycarbonate, however, houses made of wood or plywood are considered the classic option.
Feeders in the form of houses perfectly protect feeding from wind, snow and rain. Most often they are durable and permanently attached.
A comment
Team leader of the repair and construction company "Dom Premium"
Ask a Question" It is better to treat a wooden feeder with drying oil or varnish. So, the structure can last for many years.
"Suspended structures made of nets or peelers
An original feeder can be made in just a minute if you use a regular nylon mesh or twigs. The main thing is that the diameter of the mesh holes allows the food not to fall out, but is sufficient for the bird to be able to grab the treat.
In addition, such feeders are best used under. Otherwise, the food may get wet and rot before the bird discovers it. There are variations of these metal mesh feeders. They are more durable, they are not afraid of either the wind or sharp claws. The roof will provide reliable shelter from the rain.
How to make feeders for street birds with your own hands - description with drawings
Small birds, especially sparrows, are quite timid creatures, so when planning the design of a future dining room, it is worth considering large windows that will help provide the bird with more room to maneuver.
DIY bird feeders made of wood
The simplest wooden feeder can be built in just one hour. The following scheme is suitable for the base.
Typically, assembly begins with the platform, then the sides and roof are attached. After the wooden frame is ready, we attach the sides, slightly protruding along the edges. Protrusions 5 cm long will be used to attach the poles. Original ideas for wooden bird feeders made of wood can be seen in these photos.
1 of 9
DIY plywood bird feeders
The plywood construction is suitable for small (light) birds.
A significant advantage of plywood structures is that they are much lighter and cheaper than wooden ones. Such feeders are most often collected for small birds, for example, tits. First of all, we need to choose a scheme according to which we will mark the sheets of plywood.
Now let’s look at the sequence of actions for assembling a plywood feeder in more detail.
| Illustration | Description of action |
 | We cut out 2 blanks for the walls and base - 20x20 cm. |
 | The roof size is shown in the diagram. Partitions − 3×20 cm. |
 | We cut all the elements. |
 | We work on complex parts with a special attachment. |
 | We start the assembly from the base, gluing all the joints with special wood glue. |
 | We fasten the base with thin nails. |
 | We glue the sides, do not forget to sand them first so that the birds do not get splinters. |
 | After assembling all the elements, you can coat the plywood with varnish (in order not to harm the birds, it is recommended to use water-based compounds) and decorate your creation at your discretion. |
How to make a feeder from a box
The easiest way to make a bird feeder is to use a cardboard box as a base. The closest things to the “ideal” are tetrapacks and shoe boxes.
The main rule for creating a strong cardboard feeder is to choose a box from the most durable material. Ideally, find a box with a laminated coating (most often these are shoe boxes).
If you have a large box lying around, you can cut out a feeder like this.
Feeder made from juice or milk cartons
To create the simplest feeder, we need an empty container or tetrapack. It must first be washed and preferably dried. The first stage is to cut out a sufficiently large passage hole through two opposite sides of the bag.
Feeder made of plastic bottles - manufacturing and features
Plastic is a universal material. It does not allow moisture to pass through, which is, perhaps, the only advantage in our case. Along with this, this design has rather sharp edges and low resistance to wind. On the other hand, the material is easy to process and very cheap.
Edible bird feeder
One of the simplest, most aesthetic and unusual types of feeders. Agree, it’s nice to do something simple and useful in the winter cold for tits or sparrows deprived of food. Sometimes these are independent, separately hanging edible treats or even entire houses.
To make a simple edible feeder, let's prepare the ingredients and materials:
- A packet of birdseed or a mixture of hulled seeds and grains.
- Twine or tourniquet.
- Dry gelatin - 5−10 g.
- Bakery molds.
- Straws for drinks.
- Food grade silicone mat or parchment paper.
| Illustration | Description of action |
 | Pour in a glass of food. You can use seeds, husks, cereals, raisins, and apple pieces. |
 | Prepare a glass of water at room temperature and baking molds. |
 | Pour gelatin into a container. The greater the mass of powder, the denser the feeder will be. This substance will act as a kind of adhesive for the seeds. Fill the gelatin with water and leave to swell. |
 | Heat the gelatin in a steam bath. |
 | Add bird food to the container and mix the mixture thoroughly until it becomes a homogeneous, thick mass. |
 | Place the mixture into baking tins. |
 | To make a hole in the resulting mold, divide the drinking straw into small parts and place it in the desired part. |
 | Next, the molds must be dried for half an hour or 24 hours at room temperature so that the gelatin sets. Our delicacy is ready, all that remains is to hang it on the branches. |
How to attach a do-it-yourself bird feeder to a window - original photos
There are many options for how best to attach the feeder to the window. Let's take a quick look at photos of different fastener options.
1 of 6
The second most practical option is to come up with a special corner that will secure the base of the feeder to the wall of the house
There are also tray models, most often they are designed for feeding one type of food.
There is also a third type of do-it-yourself broiler feeders - these are grooved structures.
How to make a chicken feeder with your own hands
We have already offered you several types of poultry feeders. Let's tell you more about each of them.
Do-it-yourself bunker feeder for chickens made of plywood or wood: drawings with dimensions
For work we need plywood and sheet steel. The first stage is drawing up a drawing. All sizes are calculated based on the number of birds and the likely brood. The main thing is to take into account the consistency of the mixture, whenever possible alternating hard foods with more mushy ones.
Making chicken feeders from PVC pipes
A universal material for the manufacture of both tray and bunker structures.
How to make a chicken feeder from plastic bottles
Just like for their wild counterparts, you can often find feeders made from plastic bottles in the owner’s yard. Most often, 5-liter bottles are used to make feeders; they are most suitable in volume; in bunker designs they are used as the main container that fills the tray.
Making a chicken feeder from a bucket
A bucket chicken feeder is a popular invention among farmers. There are dozens of variations of this feeder. In the photo review we will show the most common of them.
Features of making chicken feeders with your own hands
Very often, chickens get caught in a crowd at the watering bowl and feeder and die. That is why feeders for babies are usually located separately, they are lower and as stable as possible. The most important thing is to ensure access to food for all the little ones. Otherwise, weak chickens will simply die from malnutrition.
You cannot use metal structures; a fallen piece of metal or a sharp piece can be fatal for chickens.. If you have any questions for the author of the article, ask them below in the comments.
A bird feeder is a very simple invention that helps our feathered friends in difficult times. Both an adult and a child can make a feeder, because this activity does not require a lot of effort. Baby bird feeders aren't always perfect, but they're always a huge accomplishment for a child!
What to make a bird feeder from?
Most often they use the simplest and most easily accessible things, those that we have at hand, such as a box, plastic bottle, plywood, cardboard, coconut, bag, dishes or something else.
What to put in the birds' feeder? How to attract birds to your feeder?
Each type of bird eats its own type of food, the most common are millet, oats, wheat, sunflower seeds, lard, meat, dried rowan and hawthorn, maple and ash seeds. Try to have a variety of grains in your feeder.
What birds fly to the feeder?
More than a dozen different birds may visit your feeder. The most common species in the city are great tits, sparrows, rock pigeons and hooded crows. If you install a feeder on the outskirts of a city, or even in a village, the species composition will be more diverse - woodpeckers, bullfinches, pikas, jays, magpies.
How to make a bird feeder?
Let's look at several options, among which there will be one suitable for you!
Bottle bird feeder. Canister bird feeder.
Materials: plastic bottle, rope, scissors (knife), adhesive tape (duct tape), rod for the pole.
1) Using scissors or a knife, we make holes in a plastic bottle into which birds will fly.
2) We cover the cut areas with electrical tape or tape so that they are not sharp for the birds.
3) We make a hole in the bottle cap into which we insert a fastening rope.
4) A little below the cuts we make two holes for the pole to make it easier for the birds to get into the feeder.
Video. Make a feeder from a plastic bottle.
Bird feeder out of the box. Bird feeder from a bag.
Materials: a box of milk (can be any box), scissors (knife), rope.
1) Cut a hole for the birds.
2) Make two holes for the rope on which the feeder will hang.
3) Attach the rope.
Video. Bird feeder made from a milk box.
Gelatin bird feeder.
Materials: gelatin, various cereals.
1) Dissolve gelatin in a water bath (Put in a saucepan, which is lowered into another saucepan where the water is hot).
2) Pour in grain to form a thick mass.
3) Place in molds and wait until they dry.
4) Attach a rope so that you can hang it on a tree.
You can make a gelatin feeder in as many different shapes as your heart desires.
Bird feeder made of wood. Bird feeder made of plywood.
Materials: plywood(wooden boards), glue, nails, hooks.
1) Draw a sketch of the feeder on a piece of paper and transfer the markings to the plywood.
2) Cut out all parts of the feeder.
3) Use glue or nails to carefully connect all parts of the feeder.
4) Attach the hooks and open with varnish for a longer shelf life.
Video. Wooden bird feeder .
Bird feeder made of cardboard. Paper bird feeder.
Materials: box, cardboard, stationery knife, glue, stapler, tape, rope.
1) In the box we cut holes of the size we need.
2) To make a roof, you need to take a sheet of cardboard, larger than the top of the box, and fold it in half. Attach it with glue or a stapler or tape.
3) We decorate the feeder, here everyone can choose the color and design at their own discretion.
4) We attach a rope on which the feeder will hang.
Video. Bird feeder made of cardboard.
How to decorate a bird feeder?
You can decorate the feeder in a variety of ways, from simple painting with paints, to various types of additions in the form of balls, cones, ribbons, and molds.
In our article we showed you the simplest ways to make a feeder, but there are also many other options:
