We make topiaries from corrugated paper. We make topiary from corrugated paper to create a cozy interior. Topiary from paper flowers.

03.01.2024

Topiary can become a highlight in any home, and most importantly, it is believed that it drives away negative energy and brings happiness to the house. It is a symbol of vitality and prosperity.

The word “topiary” came from Ancient Rome, which was the name given to the art of caring for trees. Nowadays, topiary can be easily made with your own hands from available materials: cotton pads, napkins, corrugated paper, and crepe paper are often used.

It’s quite easy to make a topiary from corrugated paper with your own hands. The following is a simple master class on making original paper crafts.

Craft using paper napkins

This option is a little different from corrugated paper topiary. It is one of the cheapest, but is certainly suitable for beginners: if you don’t succeed in making a masterpiece the first time, you can safely try again. In addition, napkins are a handy material; everyone has it in abundance.

To make such a topiary you will need:

pot;
stick for the trunk;
stapler;
wire;
gypsum;
foam ball;
ribbons;
beads;
threads

Fold the napkin in the middle to form a rectangle. Next we fold it to form a square.

Use a stapler to secure the middle, trim the edges to make a circle.

Then we lift each layer of the napkin and get a flower. Make enough of them to cover the entire ball.

And now the topiary is ready, it will serve as an excellent decoration or gift.

Corrugated paper option

Corrugated paper topiary is one of the most popular due to its fairly simple technique and the availability of various types of colored paper.

A tree made of crepe (corrugated) paper is made similarly to the previous method, but with minor changes.

List of required items:

glue or pins;
wire;
stick;
corrugated paper;
pot;
ribbons;
moss (for decoration).

There is another instruction on how to make a topiary base ball with your own hands. If there is polyurethane foam in the house, the base can be made from it. We take a balloon, having previously moistened it a little with water, slightly inflate it, put it on a balloon with foam, and release the required amount of foam into the ball. Let it dry for 12 hours, after which we remove the ball. The base is ready.

Next we make flowers from corrugated paper. Cut a strip of corrugated paper 5 cm wide. Fold the paper 2/3 over on top. Carefully twist the tape. Using glue and pins we secure the flowers to the crown. We connect it to the tree trunk and to the pot. The product is ready.

Corrugated paper topiary (video)

Topiary made from cotton pads

This option is performed a little differently than a paper model, but this method can be noted for one simple reason: this way you can perfectly practice how to make topiary with your own hands before creating something more serious.

The main difference between this method is the use of cotton pads to create flowers.

We take a cotton pad and first bend one of its edges, and then the second, which should be above the first. We tie the workpiece with a thread just above the middle. Turn the bottom edge inside out and the flower is ready. Further actions are similar to the previous methods.

Corrugated paper roses (video)

Topiary heart

An unusual way of execution is topiary heart made of paper or other materials. The peculiarity of this method lies in the complexity of the crown shape itself.
To make the base you will need:

cardboard;
cotton pads;
glue;
threads

Cut out the desired heart shape from cardboard. We take cotton pads and, moistening them in glue, glue them onto a cardboard base to give it the desired volume. Then you need to tie it all up with thread and leave it to dry. The base is ready.

There may be different methods for gluing the finished base.

You can decorate the crown with coffee beans. Using glue, fix the coffee beans to the base.

Since the base is already ready, you can proceed directly to the design. Cut the organza into 5 cm squares. Then fold it 2 times diagonally. We bend the corners on one side and the other. Lubricate the base with glue and apply a square to it, hold it until the glue hardens.

Thus, we first paste over the outline of the heart, and then fill the rest of the space. It is more convenient to do this by moving from the edges to the middle. Next, we attach the trunk to the crown and insert the structure into the pot. The junction of the trunk and the pot can also be decorated with organza.

Topiary care

It will not grow, it will not need to be watered or fertilized. The most important thing is to ensure that it is not exposed to direct sunlight, as this will cause the fabric to fade. Occasionally you will have to shake off the dust.

And then this unpretentious interior decoration will please the eye for quite a long time.

After deciding that there should be flowers on the table, I thought about the question of how to make topiary with my own hands, because... Constantly changing flower arrangements in January is expensive.
Topiaries came to us from the times of palace luxury. When gardeners trimmed the crowns of trees and bushes in the form of balls, figures, birds. In floristry, giving an ideal shape to a bouquet by trimming is also very popular. Well, our housewives have learned to create a cozy atmosphere in the apartment with the help of mini trees. They set off the interior if they are made in appropriate colors and look unusual.

This tree looks quite unusual, ideal for the kitchen, because... it eliminates food odors and freshens the air.

We will need:

Any vertical base for the trunk (stick)
Styrofoam ball
Pot, cache-pot, cup or flowerpot
Coffee beans
Twine
Ribbons of different widths
Sackcloth
Thermal gun
Construction gypsum

First you need to wrap the stick with twine. To do this, coat one edge of the stick with a heat gun and glue the end of the twine.

Choose the length of the stick yourself, depending on how tall you want the topiary to be.
The end of the twine also needs to be secured with glue.

Let's start decorating the pot. To do this, take our burlap and begin to wrap the pot.

Coat the pot with glue and wrap it with burlap.

Excess around the edges can be trimmed off.

To avoid any white gaps, paint the foam ball black.

We cut a hole in the ball for the barrel. Lubricate the end of the barrel generously with glue.

Let's start covering the ball with coffee beans. You can do this in different ways.

For example, we apply glue to the ball, and then put a lot of coffee beans in a handful, pressing them to the surface.

But all the grains that are not fixed will scatter in all directions.

You can do it differently. Glue one grain at a time, which will take longer, but be more accurate.
You need to work quickly because the glue cools quickly.

To make the pot stable, we will fill it with plaster. To do this, pour water into the plaster and stir.

After filling the pot with plaster, you need to insert the tree into it and hold it for a while so that it is fixed.

The plaster will dry in ten hours.
We begin to decorate the finished composition. We make bows from ribbons and glue them to the trunk.

You can use beads, twine bows, dried lemon, cinnamon sticks and other decorative materials.

Instead of sticks for the barrel, you can use skewers; they are sold in grocery and hardware stores.

Master class: topiary from napkins

Napkins are always at hand. And they have a huge number of functions, so why not make a topiary decoration out of them? Let's look at a simple method and an effective master class.

We will need:

Flowerpots
Round cable channel (stick, skewers)
Newspaper
Thermal gun
Napkins
Decor
Alabaster

For the topiary ball you will use newspapers.

First you need A4 size sheets. We crumple the first sheet into a ball.

We wrap the second and subsequent ones around it.

The large ball needs to be wrapped with thread so that the edges of the newspaper do not protrude.

Now we make a hole in the newspapers with scissors and insert the barrel into it, securing it with hot glue.

A foam ball of this diameter will cost you 50 rubles in the store.

Take napkins and fold them in half.

And again in half. And cut along the second fold line.

We fasten it in the middle with a stapler.

We cut each piece into a circle shape and bend each layer towards the middle, so we form a flower.

We wrap the topiary trunk with tape; to do this, attach one end of the tape to glue and wrap it around the trunk in a spiral.

Glue flowers onto the ball. To do this, apply hot glue to each flower.

You can decorate with ribbon rings. To do this, wrap the tape around your finger, maybe twice, and glue it at the base. You can use a needle to attach the ribbon ring to the topiary.

We put the alabaster in a flowerpot, insert the topiary in the middle and wait for it to dry.

Alabaster can be covered with the same flowers from napkins. We wrap the trunk with ribbon and make a beautiful bow.

If there is room left, you can put sweets in the pot.

Topiary made of satin ribbons step by step

Ribbons can give your topiary a festive look, but they also make beautiful roses. There are a lot of ways to make flowers from satin ribbons and this art is called kanzashi. We will consider only one option, but the easiest one.

A foam ball can be purchased in Chinese online stores, fishing stores, and craft stores.

Ribbons
Glue gun
Flowerpots
Pencil, twig for the trunk
Alabaster

Take a pencil and determine the middle in the ball. We make a recess and fix the pencil with glue.

Wrap tape around the trunk of the topiary. Periodically lubricate the barrel with hot glue.

For ribbon roses, we use satin ribbons 5 cm wide and 2 meters long. This length is enough for 4 flowers.

Glue the flowers with hot glue. We fill the gaps between them with ribbons and ribbons of other colors and textures.

Making roses from satin ribbon

To make roses, take a ribbon and bend the edge at an angle.

From the end of the ribbon, fold the ribbon inwards, forming a bud.

Add glue to the bottom to prevent the rose from blooming.

After this, we tuck the ribbon under itself and we get a petal.

This is how you get a rose, lubricate the edge with glue more often. Make sure that the flower does not turn out square.

The resulting roses are very delicate.

Corrugated paper topiary

Corrugated paper allows you to make flowers of extraordinary beauty. Fold over each leaf.

Styrofoam ball
Flowerpots
Glue gun
Barrel base
Corrugated paper
Decor
Alabaster

As in the previous instructions, you need to wrap the barrel with tape and glue it to the ball.

We make preparations for flowers. We cut out the petals from corrugated paper. We stretch them across so that they take a beautiful bend.

We glue the flower to the ball and decorate the structure.

Topiary for beginners made from artificial flowers

Topiary can be made from purchased flowers. This is the fastest option for making a tree. The main thing is to choose flowers of the right shades that combine with each other.

It is very beautiful to use not the usual trunk, but a crystal candlestick.

Styrofoam ball
Flowerpots
Glue gun
Candlestick (glass)
Corrugated paper
Decor

To do this, simply cut off the buds and insert them into the ball.

Craftswomen began to use isal not so long ago; it is great for decorating topiary and gives an unusual look and style to your tree.

Sisal
Artificial flowers
Barrel (stick)
Glue gun (thermal gun)
Newspaper
Decor

They made a ball out of newspaper and wrapped it with rope. We wind balls of the same size from sisal.

We separate artificial flowers and cut off the buds, insert them into a ball.

We fix everything with glue.

To decorate the pot, you can use any decor; rhinestones, braid, adhesive ribbons made of rhinestones, various pendants and keychains are perfect.

Topiary ideas

When making topiary, you can combine several decoration options, for example, use purchased artificial flowers and organza.

Coffee topiary can be glued to a candlestick.

Candy topiaries can be given as a holiday gift to women of all ages!

The main thing is to use expensive and tasty treats.

You can make a tree that is not round and has a non-standard shape. Just using half of the ball.

Organza topiary looks very easy.

Topiary made from polymer clay looks luxurious and very realistic.

Topiary made of beads looks very delicate, an excellent wedding gift.

Video on how to make topiary with your own hands

In the interior you can often find a homemade topiary or a tree of happiness, which attracts good luck, financial wealth and good mood.

Topiary in a mug

How to make a tree of happiness with your own hands? Everything is very simple. To do this you will need the following set of materials, namely:

Master class: DIY tree of happiness in a mug

Let's prepare necessary materials:

a ball-shaped piece of polystyrene foam;
a beautiful mug;
artificial flowers;
a wooden stick or a regular pencil;
decorative ribbons for winding the barrel;
ball. It should be the same diameter as the mug;
some artificial moss or grass.

Wrapping pencil with tape and insert it into the ball. Alternatively, you can fix it using polyurethane foam in a mug.

Next, you need to insert and artificial flowers so that there are no empty spaces. After this, the finished crown is strung onto the trunk. Decorative moss or grass is used as decoration. Also, in addition, you can plant an artificial butterfly on the edge of the mug.

Photo of a tree of happiness with your own hands from corrugated paper. This topiary is made according to the same principle as topiary in a cup. Only to decorate it, instead of artificial flowers, you can use flowers made of multi-colored corrugated paper.

How to make a coffee tree?

Topiaries made from aromatic plants are very popular. They serve not only to decorate the interior, but also to fill it with aroma. Happiness trees made from coffee beans are very popular.

To make such a tree you will need the following materials:

roasted coffee beans - 100 gr.;
sippy cup;
whitewash brush;
blank in the shape of a plastic ball. The optimal diameter of the ball is 8-9 cm;
scissors;
brown threads;
two rubber bands for money;
universal colorless glue;
sand, gypsum or cement - 200 g;
branch or stick 20 cm long and 1.5-2 cm thick;
twine 50 cm.

Coffee Tree Making Guide

Using scissors, you need to make one hole in the plastic blank.

Let's sort it out whitewash brush on strands.

Attach the strands to one end of the branch. For these purposes we use an elastic band for money. Coat the future “trunk” with glue and glue it in a spiral threads. You can secure the thread at the other end of the stick with an elastic band.

We glue the ball-shaped blank with brown threads. You can also take fibers from poplar fiber for these purposes.

Using super glue, liquid nails or a glue gun, glue the ball with the first layer grains.

Tip: it is best to glue the grains in a chaotic order. Glue must be applied directly to each grain and quickly glued to the workpiece. All work must be carried out in a well-ventilated area.

The second layer is done in the same way.

Create an original one tree pot. To do this you will need strands from the brush. We coat the bottom of the container with universal glue and place it on the strands laid out on the table. Threads that protrude beyond the edges must be trimmed.

We cut the strands of the brush. They should be 3 cm longer than the height of the container. Next, you need to apply glue to the glass. Moreover, the glue is not applied to the entire surface. You should leave 2.5-3 cm on top. Next, the container is glued with strands prepared in advance. After this, it is tied at the bottom with twine, and the excess is cut off. It is also necessary to trim the strands from above. As a result of this, the threads should rise two centimeters above the glass.

Pour into a container filler. This could be sand or gypsum. You can also use polyurethane foam for these purposes. Next, you need to move the strands at the top and place a funnel with a barrel on the container.

The container should be tied at the top twine.

Finally, you can place a few coffee beans near the barrel. You can also lay moss at the base of the composition and place an insect on the crown.

Flat coffee topiary

To create such a flat coffee topiary with a magnet, you need to stock up on the following materials:

Step-by-step instruction

The first thing you need to do before starting work is to turn on heat gun so that it warms up.

While the heat gun is heating up, you can do blanks. To do this, you need to draw a circle and a pot on cardboard and cut out these details using scissors.

Assembling the tree parts. Crown and pot connect using a flat stick. To do this, you need to insert the stick into the cardboard blank so that it is between two layers of paper.

To fix the parts together we use glue.

The workpiece must be glued burlap on both sides.

Tip: the burlap on one side should be equal to the diameter of the workpiece, and on the other side - slightly larger. This way you can hide the ends of the cardboard and the tree will look beautiful from behind.

Improvised potty decorate as well as the crown.

We glue it on the back magnets.

Decorating the crown coffee beans. They are attached with glue along the edges of the workpiece. Moreover, the grains should be arranged with the cuts downwards.

We glue the next row so that the grains are arranged with the cuts facing up. We alternate subsequent rows in the same way as the first and second rows.

To give the crown volume, it is necessary to glue several layers in its central part.

Finally, you will need to glue decorative ribbons and lace.

Topiary - tree of happiness made of boxwood

To make this decoration you will need the following materials:

boxwood branches. Both artificial and natural branches are suitable for topiary;
decorative container;
artificial flowers;
a little moss;
filler. In our case it will be gravel;
wire.

Step-by-step instructions for making topiary - the tree of happiness

Inserted into the workpiece boxwood branches so that there are no voids.

The branches that will serve as the trunk must be tied wire.

A hole is made in the spherical blank and the ball is placed on the barrel.

A layer of moss must be placed on top of the gravel.

The crown can be decorated with artificial flowers.

DIY money topiary

Topiary can also be made from artificial paper money. Such decoration can attract financial well-being to its owner. Making such a money topiary with your own hands is not particularly difficult.

For manufacturing you will need the following materials:

Step-by-step instruction

Decorating the pot. Colors the upper part, about one or two centimeters. For these purposes, it is best to use acrylic paint. Cover the rest of the pot with twine. For these purposes, apply a thin layer of glue over the entire surface using a toothpick. The end of the twine is securely fixed with glue.

The basis for the crown we make it from old newspaper and thread. To do this, simply crumple newspaper sheets and wrap them with thread. In our case, the workpiece is about 10-11 cm in diameter. In order for the ball to be durable, it must be coated with PVA glue. After the glue has dried, you need to make a hole three to four centimeters deep in the workpiece.

12-15 skewers need to be tied together. Their number depends on the diameter of the paper blank. We tie the skewers on both sides with thread. Using a hot glue gun, pump hot glue into the hole and immediately insert the tied swords there. After the glue has dried, you can begin wrapping the trunk with twine. During the wrapping process, coat the barrel with glue. We fix the ends of the twine.

Napkins or newspapers must be torn into pieces. PVA glue is mixed one to one with water. Next, one or two layers of the adhesive mixture are applied to the newspaper blank so that the threads and newspaper are not visible.

Let's do gypsum mortar and pour it into the pot. There should be about one centimeter left to the top edge of the pot. The trunk must be installed in the center of the pot. If necessary, hold the barrel with the workpiece until the mixture hardens. This process takes about 15-20 minutes.

While the plaster hardens, you can make blanks from artificial banknotes. To do this, they need to be cut in the shape of a circle. To make disks you will need artificial money measuring 15.5x6.5 cm. On average, our ball will need 17-18 disks. The paper blanks must be folded in the form of an accordion with a width of about one centimeter. We tie the resulting accordion in the middle with a ribbon, and glue its ends on both sides.

We glue the bills to the ball from bottom to top. Hot glue is used for these purposes. We close the gaps with coins.

From paper money We make elements of different shapes and attach them in a chaotic manner.

You can decorate plaster using sisal.

We place small ones under the tree burlap bags. To do this, cut out a circle from the fabric, the diameter of which is about 9-10 cm. Take a needle with a strong thread and stitch it along the entire circumference at a distance of 1.5 cm from the edge. After this we tighten the thread. We place a large coin inside the bag and fill it with cotton wool or padding polyester on top. We tighten the bag and secure it with several stitches.

Decorative parts should be glued to the pot, and the crown can be decorated with coins.

DIY ribbon topiary

Do-it-yourself topiary made from ribbons looks very impressive. To make such a decoration you will need the following materials:

ball-shaped blank made of polystyrene foam;
stick or pencil;
ribbons;
glue;
decorative pot;
invisible.

The tape is cut into small strips and wound around your finger to form rings. Then, one by one, you need to attach the formed rings to the workpiece. At the same time, make sure that there are no empty spaces on the ball. On one side, the pencil is inserted into a ball with ribbons, and on the other, it is inserted into a pot filled with gravel. As a decoration, you can put decorative frost or decorate with trimmings from ribbons.

Topiary - a tree of happiness with your own hands from fresh flowers

Topiary can also be made from fresh flowers. To do this you will need the following materials:

decorative container;
plastic bag;
chopsticks or branches;
putty;
floral sponge;
decorative ribbons and wire;
Natural flowers. In our case, 9 roses.

We wrap the inside of the pot with a bag and fill it with putty solution so that 5-7 cm remains on top. Insert a stick into the solution and leave it overnight. After the putty has hardened, the remainder of the bag must be cut off.

Cut out a circle from a floral sponge and fill the pot with it to the very top. Next, wet the sponge and place a layer of moss on top. You need to stick roses in the central part of the sponge. They can be secured using decorative tapes with wooden rods. Bows can be used for decoration.

DIY paper topiary

DIY paper topiaries are very popular. They can be made according to any of the above instructions. For the base you will need a polystyrene foam ball, a decorative small vase, a pencil and paper flowers. To make flowers, you can use both regular and corrugated paper. To revive the topiary, you can use regular moss, which is usually placed in a vase.

Candy topiary master class

To make such a topiary you will need a standard set: a ball-shaped blank, a pot, stems, ribbons and about 300 grams of colored candies. The process of making such a topiary is standard. The rod is inserted into the pot, the ball-shaped workpiece is covered with a red ribbon. The lollipops are glued on top using a glue gun. To avoid staining the candies, it is better to take them with tweezers. The space around the trunk can be decorated with glass pebbles or large beads.

Topiary from lollipops

This decoration is easy to make with your own hands. On each lollipop you need to stick a drawn eye. Next, all the candies are stuck into a sphere-shaped blank made of polystyrene foam.

Balloon topiary

A topiary made from balloons looks beautiful. In order to make such a decoration you will need the following materials:

polystyrene foam blanks in the shape of a ball and cube;
pencil or flat wooden stick;
multi-colored small size balloons - 70 pcs.;
multi-colored large size balloons - 70 pcs.;
small sawdust;
glue or putty;
decorative pot;
pins or paper clips.

The process of making such a tree is standard. Only on the ball-shaped blank, instead of flowers, balloons tied together are attached.

DIY shell topiary

Another original idea is to make your own topiary from shells. Such a tree will long remind you of a summer vacation on the seashore. To create such a masterpiece you need to stock up on the following materials:

First we do tree crown. To do this, stick sisal and shells onto a foam ball using a heat gun.

Next, let's move on to the device. trunk. Our barrel will be made of wire, which must be wrapped with white thread and twisted. Two trunks will be made for our tree. Only the second one will be wrapped with twine.

The next stage is manufacturing pot. To fix the tree, foam will be used in the shape of a cylinder, which must be attached to the bottom of the pot with glue. The trunk is attached to the crown on one side, and stuck into the foam on the other. For fixation we use hot glue.

For strength, fill the distance between the flowerpot and the foam with paper, glue it and cover it with cardboard. Next, first beige and then white sisal is placed in the container. Seashells of different sizes and shapes will also be used as decoration.

To add bright accents, use a satin ribbon. The crown can also be decorated with beads on a fishing line.

An original version of making topiary from sisal and fruits

First, let's make crown For these purposes, you can take a ready-made base ball, or you can make it yourself from newspapers and threads. In our case, the base was made of newspaper, which was crumpled into a ball with a diameter of 6-7 cm.

Let's start filling the pot plaster. After the solution is poured, you need to insert the barrel there and leave it to harden.

While the solution hardens, you can begin making decor for the crown. To do this, you need to cut a small piece of sisal and make a ball out of it. In total, you will need to make about 25-40 lumps.

To decorate the trunk we use lace or twine. We fix the sisal balls on the workpiece with glue. We decorate the space around the trunk with sisal, decorative ribbons, beads, etc.

DIY felt topiary

This homemade felt topiary looks original. To make such a decoration, you need to prepare the following materials:

Manufacturing procedure

The most labor-intensive part of the work is considered making flowers. All blanks are made from fabric circles of different sizes. A minimum of 30 such blanks will be needed for a topiary. In order to make a voluminous rose from a circle, they must be arbitrarily cut in a spiral. The rosette turns out more magnificent if it has many turns. Also, small circles-bottoms are cut out before each flower, which are attached below. To decorate, attach a bead to the center of the flower.

Trunk can be painted with acrylic paint.

Crumpled wood was used as a filler for the pot. paper filled with glue.

Place a piece of green around the trunk felt, which will imitate grass.

We connect the trunk with the pot and the crown.

We attach flower and leaf blanks to the crown.

We decorate the product using ribbons, ribbons and beads.

DIY New Year's topiary

With the onset of cold weather, many people are thinking about making their own New Year's topiary. To do this, you need to prepare the following materials:

Manufacturing procedure

Using white acrylic paint, you need to paint the inside of the pot and fill it with foam. While the foam has not hardened, insert a branch there, which will be the trunk of the New Year's tree.

We fix New Year's balls, candies and pine cones on the crown using wire, toothpicks and glue.

The cones can be painted white and gold.

We decorate the topiary with New Year's tinsel.

Topiary is a handmade decorative product that looks like a tree. It is also called the “tree of happiness” or “money tree”, symbolizing wealth and prosperity in the family. It is a ball on a base fixed in a flowerpot or pot.

In ancient Rome, the art of topiary was the cutting of garden trees, and the slave who monitored this and maintained their ideal appearance was a topiary. Later, the fashion for topiary tree trimming appeared in Europe. To this day, interest in topiary continues. We offer you a master class on how to create this unusual item for interior decoration with your own hands. The most popular options are topiaries made from napkins, multi-colored corrugated paper and cotton cotton pads. Step-by-step photos will help you recreate the masterpiece yourself.

Master class on creating topiary from paper napkins

The simplest and most inexpensive option for creating a decorative tree is to use paper napkins as the main material. This method is suitable for beginners who want to try their hand at creating topiary with their own hands. It’s okay if the first time you don’t get a masterpiece like the one in the photo. Experience comes with time, and you won’t mind spoiled napkins, because this is an accessible material that many have in abundance.

Using paper napkins, using your imagination, you can create real masterpieces

But in addition to paper napkins of different sizes, you will need the following materials and tools:

Topiary kit: tree base

The size of the tree flowers depends on the size of the paper napkins. The larger they are, the larger the flower will be. So let's get down to business.

Advice. You can make small cuts around the napkin with scissors. This is done to give the petals a velvety texture.

Advice. To disguise the plaster in a pot, you can pour transparent decorative stones onto it.

Making a “money tree” from corrugated paper

Another equally interesting activity is making topiary from multi-colored corrugated paper. To create a tree you need to prepare:

Styrofoam ball or balloon and construction foam.

Pins or heat gun.
Corrugated paper.
Wire.
A stick.

Corrugated paper topiary set

Satin ribbons.
Moss, tinsel (for decoration).
Pot.

Almost every topiary creation begins with purchasing or making a base yourself. Of course, the easiest way to buy it is in a store. But in our master class we will clearly explain how to do everything yourself. Follow the step by step instructions.

The newspaper version has already been successfully tried. It's time to create the base of the topiary from polyurethane foam. To do this, you will need a regular balloon; you need to moisten it a little with water inside. After slightly inflating the balloon, place it on a container of construction foam and release the required amount. The hardening process will take about 12 hours, perhaps a little less. After drying, remove the ball, leaving an excellent round base.

Ball for topiary made of polyurethane foam

The next step is to make flowers from paper. You can use one shade of corrugated sheet or several different ones for all flowers.
Cut a strip of paper 3 cm wide and fold it in 2/3 of the way from one edge.

Making roses from strips of corrugated paper

Carefully twist the ribbon into a spiral. It should be tighter in the middle, but looser on the sides. You should get a very beautiful delicate rose. Secure the free edge with glue or thread. You will need a lot of these flowers. Therefore, it is necessary to make them for future use.

Advice. To make roses look natural, you need to straighten the petals a little with your hands.

Using pins or a heat gun, the flowers are attached to the base. There should be no free space left on the ball.
The trunk of the future tree should be wrapped with white satin ribbon. To ensure that it holds well as you screw it onto the barrel, fix it with a heat gun or regular glue.

Installing a topiary trunk on foam plastic

We connect the barrel to the ball and place it in the pot. First you need to put a piece of foam in it so that it fills the entire inner surface of the pot. Mask the foam base on top with moss or tinsel.
Another magnificent tree is ready.

Corrugated paper topiaries

Making a “tree of happiness” from cotton pads

Every girl who takes care of her appearance always has cotton pads in stock. So, why not make your own topiary from them? Prepare the materials necessary to create the tree:

Let's move on to the next creation. This option is as popular as creating a topiary from paper napkins. The master class will appeal to both beginners and experienced craftsmen.

Attention! Cotton pads are usually sold white, but if necessary, they can be painted with special paints or improvised means. So, you can get green material by dipping a disk in a solution of brilliant green. Brown, respectively, in iodine.

First, let's make the flowers. Roll the cotton pad into a roll shape and fasten it at the bottom with a stapler or tie with thread. Unfold the top of the roll and shape it into a flower. Make 10–15 of these roses.

Making roses from cotton pads

Another option for making a topiary base is to use knitting yarn. The ball of thread must be wrapped in plain paper. It is advisable to make several layers. Then wrap the resulting ball well with tape. The base is ready and you can proceed to further actions.
Fasten the ball and the trunk, and secure its base in the pot with plaster.

Base ball for topiary

The ball must be decorated with roses made from cotton pads. They are attached to it with glue.
The tree trunk is decorated with a satin ribbon. It can be replaced with wrapping paper or foil. Instead of a wooden stick used as a trunk, you can use strong wire, well bonded in several layers.
The plaster base is decorated with decorative greenery or tinsel. It is best to attach it with glue.

Options for topiary made from cotton pads

Instead of a pot, you can use improvised materials: a paint can or a plastic mayonnaise bucket. You can give them the appropriate appearance using fabric or wrapping. And tie a satin ribbon bow on top.

Advice. To make the roses on the ball look different, cover them with a small layer of hairspray with a glitter effect, and glue on beads or seed beads. Decorative figures can be placed on the crown of the money tree or its trunk.

Topiary care

Topiary is just the kind of tree that requires absolutely no maintenance. It does not need to be watered, fertilized or replanted. It will delight you with its appearance regardless of the season. Caring for it involves placing it away from direct sunlight, as the material may fade. It won't be necessary to blow off or shake off dust very often.

Caring for topiary involves removing dust

A decorative “tree of happiness” made by yourself will become a talisman for your home. It is also suitable as a holiday gift for family or friends. For some time now, topirary has become widespread in wedding floristry. Bridal bouquets are made not from fresh flowers, but from decorative materials. Their advantage is that the flowers on them will not wither during the day or freeze in winter. In general, creating topiary is a fascinating process that captivates many, regardless of age and gender. Simplicity of action, inexpensive and beautiful materials and excellent results are the main motivators for learning a new hobby.

DIY corrugated paper topiary: video

DIY topiary: photo

Master class on making flower topiary with your own hands

Purpose: as a gift, a decorative element in the interior.

Target: development of fine motor skills of the hands. Development of imagination and aesthetic taste.

Tasks:

Develop creative abilities;

Cultivate patience and accuracy.

The master class is designed for school teachers and preschool teachers, parents and school-age children.

Necessary materials:

Double-sided colored paper, floral paper, a small bowl or any other dish where you can place topiary, plasticine, ordinary threads, knitting threads, a thin straight twig, glue, scissors, pencil, multi-colored satin ribbons.