Triangle and square made of paper drawings. How to make a pyramid out of paper? To make a quadrangular figure you will need

Thanks to the art of origami, you can create a pyramid. Moreover, there are both fairly simple ways to make it (for example, by cutting out the corresponding shapes from paper and assembling it), and very complex ones (for example, from a simple sheet of paper, doing various manipulations). In general, if we talk about the pyramid, then it is a mysterious figure. They say that it even stores energy. Many pyramidal structures are found around the globe. These are not only the well-known Egyptian pyramids. Such structures exist all over the world (in Mexico, China and other places).

From this article, thanks to descriptions, pictures and videos, you will learn about several ways to make a pyramid out of paper.

First Method

1. Bend the square vertically and straighten it, horizontally and straighten it, diagonally and stretch it. All this is done to outline the lines. Bend all corners towards the center.

2. Raise the side corners to the top. Then straighten the top corner into a square.

3. Fold the side corners of the upper square along the lines and tuck them inward.

4. Bend the upper triangle down and turn the part over to the reverse side.

6. Raise the bottom corners up.

7. Straighten the side corners so that the bottom is straight.

8. Smooth out the bottom of the ribs thoroughly. Use a hole punch to punch a hole at the top of each face of the pyramid. Place a gift inside the pyramid and tighten the ribbon into the holes.

Second way

Use of blanks. You can draw them yourself, or simply download (save) our images, and then print, cut and assemble.

Third way

The pyramid in this case is made from a square sheet of paper through some steps.

Take a square sheet of paper. It is best to use a regular A4 sheet. Fold one of the corners to the opposite side and use scissors to cut off the excess or carefully tear it off. This will create a square, which we will use later.

First we fold the square along one diagonal and unfold it, and then along the other and unfold it again. With these actions we outline the necessary lines. Then roll a double triangle out of the square, holding its halves. Then you need to fold the two corners of the base of the figure towards the center. Turn the figure over and do the same operation.

After this, you need to bend the corners to the center again on one side, then turn the figure over and do the same on the other side. Then bend the diamond twice on one side, bend the corner inward and bend it again, similarly on the other. After this, let’s turn the craft over and do similar actions.

Bend the pyramid in the other direction to form a four-pointed star. With both hands, grab different ends and add volume to the figure. First, for some opposite edges, and then for the other. Gradually, the pyramid that we so wanted to assemble will begin to appear from the paper. If you succeeded, congratulations. You have achieved mastery in this and your paper pyramid is ready. Next time it will be easier to do this operation, and you can easily make a whole bunch of pyramids.

Also know that at the final stage you need to be very careful not to accidentally tear the figure. If anything from the description was not entirely clear, watch the video.

Fourth method

You will need to cut out one figure from paper and then connect all the elements to form a pyramid.

For the craft you need to take: a sheet from which the pyramid model is made; small triangle; glue; scissors; marker.

Cut out a square. Let's draw the same one on a piece of paper, circling the previously cut out square with a marker. Fold the previously cut shape in half in different directions so that the folds are visible. Let's expand it and in our drawing we will mark the traces of the folds, which will be located in the centers of the sides. Then place the diagonal of the triangle on each marked side and make a mark again.

Then use lines to connect the drawn triangle and the vertices of the future pyramid. To ensure everything works out accurately, it’s better to use a ruler. Using a marker, then draw a line for gluing the sides. Right and left, but so that everything is the same on all sides.

Carefully cut out the shape along the marked lines. Apply glue (you can use regular PVA glue) to the gluing sides and glue the pyramid. To make the craft more stable, you need to use very thick paper. Here you can also express your imagination and creative nature. The pyramid can be decorated, various symbols can be pasted (for example, symbols of wealth, good luck) and other stickers.

Also watch the video on the 4th method of creating a paper pyramid.

It seems that if you used at least one of the methods and made this figure, then you can be congratulated - you learned how to make it and now you know how to make a pyramid out of paper.

To make three-dimensional geometric shapes, the main thing is to have templates that can be cut out and then glued.

Can be made from white or colored paper. You can cut it out of paper with any designs or numbers.

I propose to make an unusual three-dimensional figure using the origami technique. Watch the video:

So that children can better remember what geometric shapes there are and know what they are called, you can make them out of thick paper or cardboard volumetric geometric shapes. By the way, you can use them to make beautiful gift wrapping.

You will need:

• thick paper or cardboard (preferably colored);
• ruler;
• pencil;
• scissors;
• glue (preferably PVA).

The most difficult thing is to develop and draw layouts; you need at least basic knowledge of drawing. You can take ready-made designs and print them on a printer.

To keep the fold line straight and sharp, you can use a blunt needle and a metal ruler. When drawing a line, the needle must be bent strongly in the direction of movement, almost laying it on its side.

This is a development of a trihedral pyramid

This is a cube scan



This is the development of an octahedron (tetrahedral pyramid)



This is the development of a dodecahedron



This is the development of an icosahedron



Here you can find templates for more complex figures (Platonic Solids, Archimedean Solids, polyhedra, polyhedra, different types of pyramids and prisms, simple and oblique paper models).

Volumetric geometric shapes are the best way for a child to explore the world around him. An excellent educational material/excellent teaching aid for studying geometric shapes is precisely three-dimensional shapes. This way, geometric shapes are better remembered.

The best material for making such three-dimensional figures is thick paper (can be colored) or cardboard.

For production, in addition to paper, you will also need a pencil with a ruler, as well as scissors and glue (cut and glue the developments).

You need to draw the scans in a similar way and cut them out:







After which they need to be glued edge to edge.

You should get the following type of volumetric geometric shapes:













Here are several schemes by which you can make three-dimensional geometric shapes.

The simplest one is tetrahedron.



It will be a little more difficult to make octahedron.



But this three-dimensional figure - dodecahedron.



One more - icosahedron.



More details about making three-dimensional figures can be found here.

This is what three-dimensional figures look like not assembled:



And this is what the finished ones look like:



You can make many original crafts from three-dimensional geometric shapes, including gift wrapping.



Before you start making three-dimensional geometric shapes, you need to imagine (or know what it looks like) the figure in 3D dimension: how many faces does this or that figure have.

First you need to correctly draw a figure on paper along the edges that must be connected to each other. Each shape has edges that have a specific shape: square, triangle, rectangle, rhombus, hexagon, circle, etc.

It is very important that the length of the edges of the figure that will be connected to each other are the same length, so that no problems arise during the connection. If the figure consists of identical faces, I would suggest making a template while drawing and using this template. You can also download ready-made templates from the Internet, print them, bend them along the lines and connect (glue) them together.

Cone Pattern:



Pyramid template:



You will need to make three-dimensional geometric shapes both in school classes and for studying shapes with kids. This process can be turned into a game by making dense three-dimensional geometric shapes out of cardboard.

To make the figures we will need a pencil, ruler, colored cardboard, glue.



You can print out diagrams from the Internet, then apply them to thick paper, not forgetting about the fold lines that will be glued together.

You can use the following schemes:













But they are already in finished form.



This way you can spend time with your baby having fun and usefully studying geometric shapes.

By making three-dimensional figures from paper yourself, you can not only use them for entertainment, but also for learning.

For example, you can clearly show your child what a particular figure looks like and let him hold it in his hands.

Or you can print out diagrams with special symbols for training purposes.

So I suggest you familiarize yourself with this topic below dodecahedron, both simple and with small drawings, which will only attract the baby’s attention and make learning more fun and entertaining.





Also the diagram Cuba Can be used to teach numbers.







Scheme pyramids can help you understand the formulas that apply to a given figure.





In addition, I suggest that you familiarize yourself with the diagram octahedron.







Scheme tetrahedron Among other things, it will help you learn colors.

















As you understand, the above templates must be printed, cut out, bent along the lines, and glued along special narrow strips adjacent to selected sides.

Volumetric geometric figures are simply necessary when teaching: they provide students with the opportunity to hold them in their hands and examine them, which is an important part of the educational process; they are simply necessary as a tool for studying the famous Euler theorem - clearly demonstrating that even with deformations and curvatures, the number of faces of a polyhedron , and therefore Euler’s relation, will remain unchanged:

In addition, solid figures can be an excellent tool to help explain to students how to find the surface area of ​​a polyhedron.

So, using the templates below you can easily make the following shapes:

Triangular Prism



N-gonal prism



Tetrahedron



Icosahedron



And several more rare volumetric geometric shapes can be found at this link.

Comments (0 )

New ones first

Old ones first

The best first

OR LOG IN AS A GUEST

Latest comments on the site

⇒ "I love various videos about animals. I found Sema by accident on the Internet, and I can’t tear myself away. Not only have I watched all the videos featuring a funny hamster, I’m also forcing my husband to watch it. We laughed and had so much fun together that we decided to get our own little furry. I'm looking forward to going to the store. It’s a pity that we live far away, it would be great to introduce two handsome guys. Like, and definitely subscribe, repost, I will be a fan of the handsome guy. I'm looking forward to new videos."
Added - 07/13/2019
⇒ "I really like such funny monologues and scenes! The video lifts your spirits and puts you in a positive mood, you can laugh, and sometimes this is so lacking in our lives! I’m sure absolutely all parents have to check their child’s diary - it’s funny when you “discover” the news that the country has long switched to a twelve-point system! It looks like this dad is behind the times; it wouldn’t hurt for him to learn a little himself. Laughter, and that's all! Thank you for the opportunity to see all the most interesting things."
Added - 07/13/2019
⇒ "This is what happens because of the state of our roads. Some hole that was not repaired in time led to such an accident. Five cars were not just injured, but seriously damaged. And who will compensate for all this now? You can, of course, sue those who must repair this section of the road. But it will be so difficult to find this organization. In such a situation, each organization turns its attention to the other. So car owners won’t have to sue themselves for anything. I wonder if insurance can somehow help in this case?"
Added - 07/13/2019
⇒ "The plane is burning right before our eyes. You can even see how he is more and more consumed by the flames. The evacuation took 55 seconds, but it’s good that at least someone was able to escape. I wonder what was going on inside the plane at that moment. Was there panic between people? Usually at such moments the crowd behaves inappropriately. Thanks to the deceased flight attendant. Thanks to him, we probably managed to save many frightened people. Apparently the passengers were in such shock that they didn’t understand where to run or how to help themselves. It is necessary to inform people before the flight about rescue."
Added - 07/13/2019 Testing cheats on video
⇒ "I have never used cheats in multiplayer games, but at the same time I was curious to find out how they work and what the player sees when he uses them. It seems to me that the most harmless cheat in this video is wallhack, of course it gives a good advantage, but it cannot be compared with aim bot :) There is no chance against a player who turns it on, unless you meet such a comrade with the whole team, then aim bot is unlikely to be able to kill everyone at once, although who knows, but in general cheats are absolute evil! :)"
Added - 07/13/2019

The most complex and unusual forms of structures, devices, and mechanisms are based on elementary geometric figures: cube, prism, pyramid, ball and others. To begin with, learn how to create the simplest shapes, and then you can easily master more complex shapes.

Many modelers start their journey with paper models. This is due to the availability of the material (finding paper and cardboard is not difficult) and the ease of processing it (no special tools are required).

However, paper also has a number of characteristic features:

• capricious, fragile material
• requires high accuracy, attentiveness, and perseverance when working

For these reasons, paper is a material for both beginners and true masters, and models of varying complexity are created from it.

In this article we will study the simplest geometric shapes that can be made from paper.

You will need the following materials:

• paper
• pencil
• ruler
• eraser
• scissors
• PVA glue or glue stick
• glue brush, preferably with stiff bristles
• compass (for some figures)

How to make a cube out of paper?

A cube is a regular polyhedron, each face of which is a square.

Creating a cube consists of two stages: creating a flat pattern and gluing. figures. To create a diagram, you can use a printer by simply printing out the finished diagram. Or you can draw the development yourself using drawing tools.

Drawing a sweep:

1. We choose the dimensions of the square - one side of our cube. The piece of paper should be at least 3 sides wide of this square and slightly more than 4 sides long.
2. We draw four squares along the length of our sheet, which will become the sides of the cube. We draw them strictly on the same line, close to each other.
3. Above and below any of the squares we draw one of the same squares.
4. We finish drawing the gluing strips, with the help of which the edges will be connected to each other. Every two edges should be connected by one strip.
5. The cube is ready!

After drawing, the development is cut out with scissors and glued with PVA. Spread a very thin layer of glue evenly with a brush over the gluing surface. We connect the surfaces and fix them in the desired position for a while, using a paper clip or a small weight. The glue takes about 30-40 minutes to set. You can speed up drying by heating, for example, on a radiator. Afterwards we glue the following edges and fix them in the desired position. And so on. This way you will gradually glue all the faces of the cube. Use small amounts of glue!

How to make a cone out of paper?

A cone is a body obtained by combining all rays emanating from one point (the vertex of the cone) and passing through a flat surface.

Drawing a sweep:

1. Drawing a circle with a compass
2. We cut out a sector (a part of a circle limited by an arc of a circle and two radii drawn to the ends of this arc) from this circle. The larger the sector you cut, the sharper the end of the cone will be.
3. Glue the side surface of the cone.
4. We measure the diameter of the base of the cone. Using a compass, draw a circle on a sheet of paper of the required diameter. We add triangles to glue the base to the side surface. Cut it out.
5. Glue the base to the side surface.
6. The cone is ready!

How to make a cylinder out of paper?

A cylinder is a geometric body bounded by a cylindrical surface and two parallel planes intersecting it.

Drawing a sweep:

1. We draw a rectangle on paper, in which the width is the height of the cylinder, and the length determines the diameter of the future figure. The ratio of the length of the rectangle to the diameter is determined by the expression: L=πD, where L is the length of the rectangle, and D is the diameter of the future cylinder. Substituting the required diameter into the formula, we will find the length of the rectangle that we will draw on paper. We finish drawing small additional triangles that are necessary for gluing the parts.
2. Draw two circles on paper, the diameter of a cylinder. These will be the top and bottom bases of the cylinder.
3. We cut out all the details of the future paper cylinder.
4. Glue the side surface of the cylinder from a rectangle. Let the parts dry. Glue the bottom base. Waiting for it to dry. Glue the top base.
5. The cylinder is ready!

How to make a parallelepiped from paper?

A parallelepiped is a polyhedron with six faces and each of them is a parallelogram.

Drawing a sweep:

1. We select the dimensions of the parallelepiped and the angles.
2. Draw a parallelogram - the base. On each side we draw the sides - parallelograms. From any side we draw the second base. Add strips for gluing. A parallelepiped can be rectangular if the sides are rectangles. If the parallelepiped is not rectangular, then creating a development is a little more difficult. For each parallelogram you need to maintain the required angles.
3. We cut out the development and glue it together.
4. The parallelepiped is ready!

How to make a pyramid out of paper?

A pyramid is a polyhedron, the base of which is a polygon, and the remaining faces are triangles having a common vertex.

Drawing a sweep:

1. We select the dimensions of the pyramid and the number of its faces.
2. Draw the base - a polyhedron. Depending on the number of faces, it can be a triangle, square, pentagon or other polyhedron.
3. From one of the sides of the base we draw a triangle, which will be the side. We draw the next triangle so that one side is common with the previous one, and so on. So we draw as many triangles as there are sides in the pyramid. We finish drawing strips for gluing in the right places.
4. Cut out and glue the shape.
5. The pyramid is ready!

A triangle is the simplest and most basic figure not only in geometry, but also in the art of origami, because in order to create masterpieces from paper, you must first learn how to fold a triangle out of it. We will tell and show you how to make a triangle in different ways and, having mastered them, you can move on to more complex crafts.

How to make a triangle from office paper

Let's start with the easiest option - fold an isosceles triangle out of paper. For this you will need paper and scissors.

• Fold the top corner of the sheet diagonally, crimp the fold line and cut off the unnecessary rectangular strip. Unfold the piece, cut it in half diagonally and you have two triangles in your hands.

• Fold the base a few more times lengthwise and crosswise to obtain smaller figures. If the triangles are made from colored paper, they will come out brighter and it will be more fun to work with.

How to make a double triangle out of paper

A paired triangle is the simplest form of design using the origami technique.

• Cut out a square of paper of the required size, bend and straighten it diagonally.
• Fold the workpiece along the middle (horizontal) line.
• Bend the two side triangles inward, then rotate the figure - and do the same with the next pair of triangles.

The basic “double triangle” shape is ready.

How to make a modular triangle out of paper

It is better to learn how to assemble such triangles on a large sheet of A4 paper, and to construct them from small pieces. The aspect ratio of the rectangle for the module is 1:1.5.

• Fold the sheet in half horizontally, smooth the middle line vertically with your fingers and bend the ends to the center mark.
• Turn the module over and lift the edges up.
• Fold the side corners through the main shape.
• Straighten the base, fold small triangles along the lines, lift the edges up. Fold the base in half.

You have got modules with two corners and pockets, which can be inserted into each other in certain ways and assembled from them into various three-dimensional products.

How to make a volumetric triangle out of paper

A pyramid is often called a volumetric triangle, since its side faces are triangles. This figure is easy to make, just make the required template:

• Draw a square on a piece of paper, draw an equilateral triangle to each side and make flaps for gluing. You can simply download the scan from the Internet;

• cut out the workpiece, crumple along the fold lines and glue along the allowances. After drying, paint the craft or decorate it with stickers, emoticons, and appliqués.

How to make a soldier's triangle out of paper

The front letter is done quickly and the assembly method resembles the origami technique.

• Take a regular notebook piece of paper, write congratulations and wishes to your loved one on it, then fold the paper according to the pattern - first from right to left, then vice versa.
• Fold the remaining strip of paper inside the upper triangle, having first folded the lower corners at both ends. Smooth out all fold lines to shape the envelope. Sign the recipient's initials on the front side of the triangle and give your unusual gift on Victory Day to your dear veteran.

It’s not difficult to make a triangle out of paper, just read the article carefully, choose the desired manufacturing method and follow our recommendations when working.